Specifically Designed for Porcelain Only

This epoxy grout is formulated for use with porcelain paving slabs and porcelain tiles only. It is not suitable for natural stone such as sandstone, limestone, or other porous materials.

Porcelain has a dense, low-porosity surface that requires a high-performance bonding solution. Our gunable epoxy grout is engineered to adhere securely to porcelain edges while maintaining colour consistency and structural strength.

Why Choose Our Gun-Applied Epoxy Grout?

Traditional sand and cement joints can be messy and inconsistent. Our cartridge system allows controlled application directly into the joint, reducing waste and eliminating surface staining on porcelain slabs.

• Precision Application: Inject directly into joints with minimal mess.
• Waterproof Finish: Fully non-permeable once cured.
• Frost Resistant: Withstands freeze and thaw cycles.
• Weed Resistant: Forms a solid barrier once set.
• Consistent Colour: Uniform finish across the entire installation.

Step-by-Step Application Guide

• Prepare: Ensure joints are clean, dry, and free from debris.
• Load: Insert the 400ml cartridge into a compatible high-ratio applicator gun.
• Apply: Cut nozzle to required joint width and apply steady pressure.
• Finish: Tool the joint surface for a smooth, professional appearance.
• Clean: Remove any residue immediately from porcelain surfaces.

Durable in All UK Weather Conditions

Outdoor porcelain paving in the UK must withstand rain, frost, and temperature variation. Because this epoxy grout does not absorb water, it resists cracking caused by freeze-thaw cycles.

Once cured, the joint becomes a dense, hard-wearing barrier that protects the integrity of your porcelain patio installation.

Order Porcelain Epoxy Grout

Available in a range of popular shades to complement modern porcelain paving designs. Each 400ml cartridge provides clean, controlled application for professional-quality results.