Description

Interior Tile Spacer & Leveling System

Our Interior Tile Spacer & Leveling System is designed to make tiling quicker, easier and more accurate. Ideal for interior floors and walls, the reusable leveling clips help keep adjoining tiles flat and prevent unwanted raised or low edges between tiles.

The system is simple to fit and just as easy to remove using the supplied special T-wrench. Once you get used to the system, it can make a noticeable difference to installation speed while reducing the strain and fatigue that can come with positioning and adjusting tiles by hand.

Reusable Tile Leveling System

Unlike disposable leveling systems, these tile leveling clips are reusable, making them a practical choice for professional tilers and regular installers.

The system is manufactured from high-impact thermoplastic, with a 1.4mm stainless-steel component for strength and durability. It can be used with 1.5mm, 2mm and 2.5mm plastic tile spacers, giving you flexibility depending on the joint size required.

How to Use the Tile Leveling System

1. Position your tiles and place the required plastic tile spacer between them.
2. Adjust the stainless-steel needle into a straight position so it can be inserted into the tile joint.
3. Position the leveling system across the two adjoining tiles.
4. Use the T-wrench to turn the black adjustment cover, bringing the two tiles into the same level.
5. Allow the adhesive to set before removing the leveling system.

As a general guide, allow around 5–6 hours before removing the system. Setting times will vary depending on the adhesive being used and the conditions on site. In warmer conditions, the adhesive may set considerably quicker, so check the tiles regularly every 30 minutes to 1 hour before removing the leveling system.

Important Removal Tip

We strongly recommend moving the T-shaped needle backwards and forwards before fully tightening the system.

This small step helps prevent the needle from sticking to the adhesive and makes the tile leveling system much easier to remove once the adhesive has set.

The system can then be removed quickly and cleanly, ready to be used again on your next installation.

Ideal for Interior Tiling

The Interior Tile Spacer & Leveling System is suitable for a wide range of wall and floor tiling projects, including porcelain, ceramic and other suitable tiles.

Key benefits:

• Reusable tile leveling system
• Suitable for interior floors and walls
• Helps prevent lippage between tiles
• Speeds up tile installation
• Helps reduce installer fatigue
• High-impact thermoplastic construction
• 1.4mm stainless-steel component
• Compatible with 1.5mm, 2mm and 2.5mm tile spacers
• Easy to tighten and remove with the T-wrench
• Suitable for professional tile installations